ASROCK Fatal1ty X79 Champion Serie Manual De Instrucciones página 32

TM
2.6 SLI , 3-Way SLI
Guide
This motherboard supports NVIDIA
TM
SLI (Scalable Link Interface) technology that allows you to install up to four
identical PCI Express x16 graphics cards. Currently, NVIDIA
supports Windows
TM
4-Way SLI and Quad SLI
/ 7 / 7 64-bit OS only. Please follow the installation procedures in this section.
Requirements
1. For SLI
2. Make sure that your graphics card driver supports NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the
2.6.1 Graphics Card Setup
2.6.1.1 Installing Two SLI
Step 1. Install identical SLI
cause different types of graphics cards will not work together properly. (Even
the GPU chips version shall be the same.) Insert one graphics card into
PCIE1 slot and the other graphics card to PCIE5 slot. Make sure that the
cards are properly seated on the slots.
32
TM
, 4-Way SLI
®
® TM TM
Vista / Vista 64-bit / 7 / 7 64-bit OS. NVIDIA
TM
technology supports Windows
TM
technology, you should have two identical SLI
®
cards that are NVIDIA certified. For 3-Way SLI
have three, whereas for 4-Way SLI
TM
Quad SLI technology, you should have two identical Quad SLI
graphics cards that are NVIDIA
(driver version 280.41 and later). Download the driver from NVIDIA website
(www.nvidia.com).
minimum power required by your system. It is recommended to use NVIDIA
certified PSU. Please refer to NVIDIA
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
Fatal1ty X79 Champion Series Motherboard
TM
and Quad SLI
TM TM
SLI , 3-Way SLI , 4-Way SLI
TM
TM
technology you should have four. For
®
certified.
®
website for details.
TM
Operation
TM
and Quad
® TM
SLI technology
®
3-Way SLI
® TM TM
Vista / Vista 64-bit
TM
-ready graphics
technology you should
TM
-ready
® TM
SLI technology
®
certified be-
TM
,
®