Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
•
Keep the power cable away
from the cutting tool when work-
ing. The cutting blades may
damage the power cable and
result in contact with live parts.
Always run the power cable be-
hind the operator.
•
Do not use the power cable to
pull the plug from the socket.
Protect the power cable from
heat, oil and sharp edges.
•
Switch off the equipment and
disconnect the plug from the
socket if the power cable is
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the cus-
tomer services of the same, or
a qualified person, in order to
avoid hazards.
•
Do not connect a damaged
power cable to the mains. Do
not touch a damaged power ca-
ble when it is connected to the
mains. A damaged power cable
may result in contact with live
parts.
General Description
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level.
It features a powerful electrical drive, a
sturdy plastic casing, a safety switch, a
collision guard as well as a grass catcher
with level gauge. Additionally, the equip-
ment is height adjustable to six levels and
has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
62
The illustration how to handle the
appliance can be found on page
2-3.
Summary
1 Curved handle
2 Start lever
3 2 quick-release levers above to
fasten bow-type handle
4 Lower bar (2 pieces)
5 Collision guard
6 2 quick-release levers below to
fasten bar
7 Grass catcher
8 Back wheels
9 Front wheels
10 Housing
11 Cutting height adjuster
12 2 carrying handles
13 Connection cable
14 Cable holder
15 Cable strain relief
16 Power inlet
17 Release button
Assembly
Disconnect the plug before any
work on the equipment.
Assembling the Curved Handle
Install lower bar:
1. Open the lower bar (4) and
move it to the desired inclina-
tion.
2. Fix the lower bar by means of
the pre-mounted quick-release
levers (6). There are three pos-
sible positions.
Capítulos
Tabla de contenido
