Gwarancja I Serwis - GRAPHITE 59G717 Instrucciones De Uso

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w przypadku
reklamacji zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service tel. +48 22 573 03 85
Ul. Pograniczna 2/4 fax. +48 22 573 03 83
02-285 Warszawa e-mail [email protected]
Sieć Punktów Serwisowych
i pogwarancyjnych dostępna na platformie internetowej
gtxservice.pl
GRAPHITE zapewnia dostępność części zamiennych oraz
materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.
Pełna oferta części i usług na gtxservice.pl.
Zeskanuj QR kod i wejdź na gtxservice.pl
do napraw gwarancyjnych
TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
PLUNGE ROUTER
59G717
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• The cutter bit can hit the tool's power cord, therefore hold
the power tool only by insulated handle areas. Contact with
power supply line may transfer voltage to metal parts of the
device and cause electric shock.
• Fix processed material to stable surface and secure with
clamps or with any other sufficient means to eliminate
shifting. When you hold processed piece in hand or press
against your body, the piece is unstable, which may cause loss
of control.
• Cutter bits must match exactly to holder of the power
tool. Mismatch of the working tool and the power tool holder
causes irregular rotation, strong vibrations and may cause loss
of control over the power tool.
• Rotary speed of working tools must not be lower than
maximum rotary speed specified for the power tool.
Equipment subjected to greater rotary speed may get
damaged.
• Hold the plunge router by both handles during operation,
keep stable body position. Power tool is safer when held
with two hands.
• Do not touch rotating cutter bit or put hands in area of
the bit operation. Keep your second hand on the additional
handle. Guiding the device with both hands reduces risk of
cutting hands with the working tool.
• Wear personal protection equipment. Depending on
type of work, wear protective mask, goggles, protective
glasses and hearing protectors. Protect eyes from particles
produced at work and floating in the air. Anti-dust mask
provides protection of respiratory tract and must filter out
dust produced at work. Prolonged exposure to noise may lead
to hearing loss.
• Dust of certain wood types may be dangerous to health.
Direct physical contact with dusts may cause allergic reaction
and/or respiratory system diseases of operator or bystanders.
Dusts of oak and beech are considered carcinogenic, especially
in connection with wood processing substances (wood
impregnants). Therefore use of anti-dust mask, dust extraction
systems and appropriate ventilation is recommended.
• Clean ventilation holes of the power tool on regular basis.
Motor blower sucks dust into casing and large depositions
of dust may cause electric hazards. Do not use power tool in
proximity of flammable materials. Sparks can cause ignition.
• Do not use damaged or blunt cutter bits. Blunt or damaged
cutter bits increase friction, can cause jamming and reduce
material processing quality.
• Do not touch the cutter bit immediately after the work has
been finished. This element may be hot and may cause burns.
• Start the power tool before the cutter bit gets into contact
with the processed piece. Otherwise there is a risk of kick
back, because used tool can jam in the processed piece.
• Ensure all locking clamps are tightened.
• Never attach working tools other than recommended by the
manufacturer to the power tool.
11