Digital Multimeter; Safety Information - BGS technic 63402 Manual De Instrucciones

INTRODUCTION
The instrument of this series is a small hand-held 3 1/2 digital multimeter feature stable, highly reliable
and anti-drop performance. It is provided with a LCD display of 15 mm height for clear reading.
The circuit design takes LSI double integral A/D converter as its core under the protection of an
overload protection circuit, making it a superior and handy instrument.
It can be used to measure DC and AC voltage, DC current, resistance and diodes test.

SAFETY INFORMATION

This meter has been designed according to IEC 61010 concerning electronic measuring instruments
with a measurement category (CAT II 600V) and pollution degree 2.
Warning

To avoid possible electric shock or personal injury, follow these guidelines:

Do not use the meter if it is damaged. Before you use the meter, inspect the case. Pay particular
attention to the insulation surrounding the connectors.

Inspect the test leads for damaged insulation or exposed metal. Check the test leads for
continuity. Replace damaged test leads before you use the meter.

Do not use the meter if it operates abnormally. Protection may be impaired. When in doubt, have
the meter serviced.

Do not operate the meter around explosive gas, vapor or dust.

Do not apply more than the rated voltage. As marked on the meter, between terminals or between
any terminal and earth ground.

Before use, verify the meter's operation by measuring a known voltage.

When measuring current, turn off circuit power before connecting the meter in the circuit.
Remember to place the meter in series with the circuit.

When servicing the meter, use only specified replacement parts.

Use caution when working with voltage above 30V ac rms, 42V peak, or 60V dc. Such voltages
pose a shock hazard.

When using the probes, keep your fingers behind the finger guards on the probes.

When making connections, connect the common test lead before you connect the live test lead.
When you disconnect test leads, disconnect the live test lead first.

Remove the test leads from the meter before you open the battery cover or the case.

Do not operate the meter with the battery cover or portions of the case removed or loosened.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen

Digital Multimeter

Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
BGS 63402
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed