Eu Declaration Of Conformity; Statement Of Use - Fuji FA-67-8F Manual Del Operador

Operator's Manual
Technical data
Maximum working pressure
6.3 bar / 90 psig
Free speed (rpm)
Spindle thread
Height (mm)
Weight (kg)
Weight (lb)
Sound pressure level (dB(A))
Vibration (m/s²)
Vibration uncertainty
Declarations
Noise and vibration
Uncertainty 3 dB(A), in accordance with EN ISO 15744. For
Sound power level, add 11 dB(A)
Vibration standard : ISO-28927-1
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, Fuji Industrial Technique Co., Ltd, cannot be held li-
able for the consequences of using the declared values, in-
stead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
FA-67-8F FA-67-9F
7600 7000
5/8"-11 UNC 5/8"-11 UNC
117.5 117.5
2.9 2.9
6.4 6.4
FA-67-8F FA-67-9F
90 90
5.4 4.9
3.2 3.1
http://
and selecting 'Tools' then 'Legis-
© Fuji Industrial Technique Co.,Ltd. – 9502001187

EU DECLARATION OF CONFORMITY

We, Fuji Industrial Technique Co., Ltd, 2-1-14, Kamiji,
Higashinari-ku, OSAKA 537-0003, JAPAN, declare under
our sole responsibility that the product (with name, type and
serial number, see front page) is in conformity with the fol-
lowing Directive(s):
2006/42/EC (17/05/2006)
Harmonised standards applied:
EN ISO 11148-7:2012
Relevant technical information can be requested by authori-
ties only from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain, 10/09/2020
Pascal ROUSSY
Signature of issuer
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in, fire, property damage and/or
severe bodily injury.
► Read all Safety Information delivered together with
the different parts of the system.
► Read all Product Instructions for installation, opera-
tion and maintenance of the different parts of the
system.
► Read all locally legislated safety regulations regard-
ing the system and parts thereof.
► Save all Safety Information and instructions for fu-
ture reference.
The use of a bale hook is not permitted.
►

Statement of use

This product is designed for removing material using abra-
sives. No other use permitted. For professional use only.
Product specific instructions
Operation
See figures on page 2.
FA-67
www.P65Warnings.ca.gov
5