Laney DIGBETH DB500H Manual De Instrucciones página 5

DB500H FEATURES
6 - MID MODE - A 4-position rotary switch – each position applies one of four
different pre-shaped EQ sounds. The position selected works in conjunction with the
MIDS PRESHAPE LEVEL (7) control.
Position 1 -> A narrow lower mid cut which is great for giving more definition to your
bass when playing with a drummer. Pull it back to give space to the kick & snare, bring
it up to push your bass in front of the drums.
Position 2 -> A wider mid-range control is great for bringing out the growl of you bass,
very useful to give more bite to your distorted tones, or for cutting back and increasing
mid-range clarity.
Position 3 -> A narrow mid-range setting, like in position 2, though more refined and
less aggressive, good for scooping out your bass for a slap tone or increasing definition
when playing distorted guitars.
Position 4 -> A upper mid setting, great to honing in on the pop of a bass or to cut
back on fret noise.
7 - MID LEVEL – This control works in conjunction with the MID MODE control.
Increasing the control boosts the set MID band, decreasing the control cuts the set MID
band. Set to 5 this bypasses the mid control irrespective of the MID MODE setting.
8 - TREBLE - Boost the higher frequenciesgiving more top end clarity to the sound.
Decrease the control to remove higher frequencies, good for a subby mellow sound.
5
6 7 8
USER MANUAL EN
www.laney.co.uk