Audi 4G9.071.151.L Instrucciones De Montaje página 18

Installation instructions - Audi A6 allroad quattro (4G) 2012 ▶
Edition 09.2011
General safety notes
WARNING
Please read these assembly instructions carefully before
starting installation. Non-compliance with these assembly
instructions and safety notes will compromise your safety
and that of third parties.
WARNING
All bolt connections and connections for the roof bars for
roof rail and for the add-on components must be checked
prior to travelling to ensure they are positioned and instal-
led correctly. Tighten if necessary.
Recheck bolted connections and connections at appropri-
ate intervals and tighten if necessary. The bolted connec-
tions and connections must be checked at short intervals if
travelling on a poor stretch of road.
If this guideline is not observed, this can result in the roof
bars for roof rail or the add-on components becoming
loose or falling off — risk of accident!
WARNING
For the safety of other road-users, the roof bars for roof rail
and any add-on components must be removed from the ve-
hicle when they are not being used.
WARNING
Repairs or the replacement of parts must only be per-
formed by a qualified workshop. It is recommended that
genuine spare parts available from your Audi partner are
used.
Caution
The height of the vehicle will change due to the installation
of the roof bars for roof rail with/without add-on compo-
nents. Please pay attention to this when entering garages,
driving through tunnels, underpasses etc.
Caution
Do not enter a car wash with the roof bars for roof rail with/
without add-on components installed.
4
2 Safety notes