Troubleshooting - EAS ELECTRIC EMRH908TX Manual De Instrucciones

TROUBLE SHOOTING
Fault
The blades are blocked.
The capacitor is damaged.
Light on, but
The motor is damaged.
motor does
The internal wiring of motor
not work
is cut off/ disconnected. An
unpleasant smell may be
produced.
Apart from the above mentioned, check the following:
Both light and
Light damaged.
motor do not
Power cord loose.
work
Outlet and the air ventilation
entrance are not tightly
Oil leakage
sealed.
The blade, if damaged,
can cause vibrating.
Vibration
The motor is not tightly
fastened.
The cooker hood is not
tightly fixed.
The distance between the
cooker hood and the cooker
top is too large.
Insufficient
suction
Too much ventilation from
open doors or windows.
The fixing screws are
The
not tight enough.
machine
The hanging screws are
inclines
not tight enough
Cause
36
Solution
Check the blades.
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as the
electric diagram.
Take down the outlet and seal
with glue.
Replace the blade.
Fasten the motor tightly.
Fixed the cooker hood tightly.
Readjust the distance.
Choose a new place to install the
appliance or close some doors /
windows.
Tighten the fixing screw and
make it horizontal.
Tighten the hanging screw and
make it horizontal.
V.1