Mount The Internal (Indoor) Water Heater To The Wall; Important - Rinnai SENSEI RU199i Manual De Instalación Y Operación

3.3 Mount the Internal (Indoor) Water Heater to the Wall

You Will Need:
•
Rinnai Tankless Water Heater
(Internal/Indoor Model)
•
Wall Mounting Bracket
1
Hold the wall mounting bracket up against the wall and
use a level to make sure the bracket is even.
Proper operation requires the water heater to be level.
Wall Mounting Bracket
Insert the water heater top bracket into the wall mounting bracket.
3
Make sure the wall mounting bracket is sturdy and can hold the weight of the water heater before you
fully let go.
Water Heater
Right Side
4 Securely screw the top and bottom brackets into the
wall, making sure the screws are flush with the wall.
•
Use any of the holes in the top and bottom
brackets.
•
Make sure the securing method is sufficient to
support the weight of the water heater. Refer
to the water heater weight in section
"2.5 Specifications."
IMPORTANT: The water heater must be installed in
an upright position. Do not install the water heater
upside down or on its side.
Rinnai Tankless Water Heater Installation and Operation Manual
Supplied by Installer:
•
•
•
Level
Level
4 screws for mounting bracket installation
Screws for top and bottom bracket installation
Use appropriate screws for type of wall construction.
2
Use 4 screws to secure the wall mounting bracket to
the wall (2 screws on far left side and 2 screws on
far right side).
Use the appropriate screws for the wall construction
to secure the mounting bracket to the wall between
two studs.
Top
Bracket
Bottom
Bracket
15