Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
OPERATION ___________________________
Note
The appliance can be used on wet
7
skin in the shower and cleaned
under the tap (only in battery mode,
see section cleaning the shaving
head).
Rechargeable battery
operation
When operating the appliance with
the built-in nickel metal hydride battery,
only use the power supply unit
plied for charging.
Check if the type plate on the power
supply unit
J
local mains supply.
1
Press the switch
switch
D
downwards to turn off the
appliance.
2
Plug the power supply unit
wall socket first and then the power
cord into the power cord socket
– During the charging process, the
charging indicator light
up blue.
– Once the appliance is fully
charged, the charging indicator
light
E
disappears.
20 ENGLISH
J
corresponds to your
D
, then push the
into the
J
lights
E
Notes
Charge up the batteries completely
7
(for at least 12 hours) before you
first use them or if you have not used
them for a long time.
The ambient temperature should be
7
between 5 °C and 40 °C.
Once you have used the appliance,
7
charging time is approx. 8 hours.
In its fully charged state, the appli-
7
ance can run for approx. 45 minutes.
It is not advisable to charge the bat-
teries after each use. Only charge
the batteries when they are com-
pletely discharged. This increases
sup-
their service life.
3
Pull the power cord out of the power
cord socket
unit
J
out of the wall socket.

Mains operation

Only operate the appliance with the
power supply unit
Check that the voltage indicated on the
.
F
type plate of the power supply unit
corresponds to your local power sup-
ply.
The only way to disconnect the appli-
ance from the power supply is to unplug
the power supply unit
F
and the power supply
provided.
J
.
J
J
Tabla de contenido
loading

Tabla de contenido