Marksman REDCAT Guia De Inicio Rapido página 17

ESC
RCR-2CENR RADIO SYSTEM
Programming (Continued)
Press and release
The Red LED
the SET button
flashes. The
once the desired
number of
number of Red
flashes indicates
flashes is
the program
reached.
option on the
chart.
Programming Flow Chart
Programming (Continued)
In the program process, the motor will emit a "Beep" tone when the LED flashes.
A long flash and long "Beep---" tone is used to represent the number "5", to easily identify items of a large number.
"A long flash" (Motor sounds "B---") = the No. 5 item
"A long flash + a short flash" (Motor sounds "B---B") = the No. 6 item
"A long flash + 2 short flashes" (Motor sounds "B---BB") = the No. 7 item
"A long flash + 3 short flashes" (Motor sounds "B---BBB") = the No. 8 item
"A long flash + 4 short flashes" (Motor sounds "B---BBBB") = the No. 9 item
5. The Red LED will flash the number of times that corresponds to the number of the
Turn off
option listed along the top of the chart. (1 flash = Option 1, 2 flashes = Option 2, etc.)
the ESC.
6. Press and release the set button until the desired number of Red flashes is achieved.
7. To finish set up, turn OFF the ESC.
8. You can now power the ESC back on. The settings should now be saved.
9. Repeat steps 1-8 for each setting you wish to adjust.
TM
16
Red LED flashes 1 time to choose
"Forward with brake"
Red LED flashes 2 times to choose
"Forward / Reverse with brake"
Red LED flashes 3 times to choose
"Forward / Reverse"