Installing The Car Seat In The Vehicle; Installation In The Car; Preliminary Steps - Foppa Pedretti Logik I-Size Manual De Instrucciones

INSTALLING THE CAR SEAT IN THE VEHICLE

INSTALLATION IN THE CAR

TIP: The child car seat is always secured in the car via the ISOFIX anchoring, even when
there is no child in the set. ALWAYS mount the seat without a child in it.
SAFETY ON BOARD THE VEHICLE
WARNING! Do not use the car seat on passenger seats with an active front airbag. This
recommendation does not apply to side airbags.
To ensure the highest level of safety for all passengers, make sure that:
• the reclining backrest of the passenger seats is locked in a vertical position;
• the passenger seat on which the i-Size car seat is installed is set to the rearmost
position;
• all objects that can cause damage in the event of an accident are adequately
immobilised;
• all passengers have buckled up their seat belts.

Preliminary steps

Make sure that your vehicle is fitted with ISOFIX anchoring points and that it is one of
those approved in the list of compatible vehicles provided.
Locate the ISOFIX points; for any problem consult the user manual of the vehicle.
The ISOFIX anchoring points are located between the seat and the backrest of the
passenger seat.
Place the car seat on the vehicle passenger seat, insert the
two ISOFIX connectors into the appropriate guides, and
push to attach the two connectors to the ISOFIX hooks in
the vehicle. You will hear a "click" once they have attached.
Check that the ISOFIX attachment indicators are green on
both sides.
• ENGLISH •
33
D
ISOFIX
fastening points
Insert guides