Safety Information - BMW Advanced Car Eye 2.0 Manual De Instrucciones

Safety information

The ACE 2.0 may only be installed by a BMW
workshop.
The ACE 2.0 app must not be used by the driver
whilst the engine is running or whilst driving.
If you sell the device, ensure that you give the
buyer the operating manual and the declaration
of conformity sheet.
Furthermore, the ACE 2.0 must be reset to
default settings before it is given to somebody
else, see section "ACE 2.0
The ACE 2.0 can also be reset to default settings
using key combinations on the front camera.
Press the Power key (1) on the rear and the
microphone ON/OFF key (2) on the side of
the front camera simultaneously for at least
3 seconds for this purpose.
Ensure that the micro SD card has been
formatted before you hand over the device, see
section "ACE 2.0 app".
app".
The ACE 2.0 can generally be restarted using the
Reset key if it suffers a system fault.
Please ensure that you do not damage
the microphone (4) by mistake.
Press the Reset key (3) on the underside of
the front camera for at least 3 seconds for this
purpose.
31