Idiomas disponibles
Idiomas disponibles
OVEN TYPE DESCRIPTION
II.
Prior To Use
:
1. Check that the voltage selector switch setting corresponds with
the power supply to be used. Unit is set to 120V when shipped.
2. Check for correct power supply cord. Unit is supplied with
120V North American configuration.
3. Check for desired thermometer (if equipped) display units (°F
or °C). Unit is set to °F when shipped. To change to °C, see
Section III in this manual.
Power Supply
Check the nameplate for voltage ratings.
Type 2 ovens are supplied with a voltage selector switch to oper-
ate on either 120 or 240 AC voltage. Please be sure to set the
switch to the proper voltage being used.
The ovens are supplied with an indicator light which indicates the
unit is energized.
Power Cords
The ovens are supplied with a female, IEC 320 power cord inlet.
This inlet accepts a male, IEC 320 power cord.
Type 2 ovens are supplied with a three blade, grounded, North
American cord for 120V AC operation. When connected to a prop-
erly grounded receptacle, these ovens meet the nationally recog-
nized standards for which they are marked.
For operation on 240V AC, a different power supply cord must be
used. One side must be configured with the IEC 320 male end.
Optional configurations are available for the other end, including
North American, European, etc. These maybe purchased locally
or through Phoenix International, Inc.
An optional cord retainer clamp kit is available to provide a
stationary cord. (P/N 1257570)
** CAUTION **
To provide continued protection against risk of
electrical shock, power cord must be
connected to a properly grounded outlet.
Electrode Storage
Type 2 series ovens are not airtight and electrodes stored within
will start absorbing ambient moisture as soon as the oven cools.
We recommend removal of electrodes at shift end and storage of
same consumables in suitable larger holding ovens until reissued.
These ovens are not to be used for rebaking or reconditioning con-
taminated electrodes. They are designed to accept electrodes in
Phone (414) 973-3400 • Fax (414) 973-3210 • www.phx-international.com • [email protected]
Phoenix International, Inc.
100% useable condition and to maintain that condition until con-
sumed at the job site. For optimum stabilization, oven should be
hot when loaded and kept "on line" as long as electrodes are being
stored.
Guide to Storage
In the absence of detailed storage information from your electrode
manufacturer, the "Guide To Electrode and Flux Stabilization" (see
last page of operators manual) may be used as an indication of
approximate temperatures. (A laminated version and poster size
version is available by contacting Phoenix International, Inc.) For
specific information involving critical operations be sure to contact
your electrode manufacturer for complete information.
Repair - Spare Parts
These instructions contain wiring diagrams and a repair parts list
for your oven. For critical welding operations requiring continuous
holding, we would suggest carrying all of the parts listed in the
"Suggested Spare Parts Section VII" of these instructions.
Temperature Settings
Type 2 ovens utilize a variable thermostat, providing an operating
range of 100°-300°F (38°-149°C) average stabilized load temper-
atures.
The oven operating temperature is set by rotating the thermostat
knob clockwise to increase the temperature of the unit.
decrease the temperature rotate the knob counter-clockwise. This
setting is approximate and may need slight adjustment once the
oven temperature stabilizes.
Temperature Indication
Type 2 ovens (P/N 1205520) are supplied with a battery powered,
digital thermometer to indicate the actual inside oven temperature
in either °F or °C.
The thermometer will indicate a numeric reading up to 300°F
(149°C). "HHH" indicates the oven is fully heated.
The thermometers are supplied in the °F mode. Conversion to the
°C mode is accomplished by simply moving the switch (located in
the battery holder) to the opposite position, as described in the
troubleshooting section of this manual.
Replacement of the battery is also covered in the troubleshooting
section of this manual.
Unit not to be exposed to rain or moisture.
Store only in dry location.
8711 West Port Avenue • Milwaukee, WI 53224 USA
•
** CAUTION **
To
N5610455B-2
