PowerWalker VI CSW Serie Guía Rápida página 3

ENGLISH
III. Display
State Display
Line /
Standby /
Battery
mode
Line
Mode
AVR
Mode
flashing
Battery
Mode
All Modes
All Modes
Battery
Mode
All Modes
All Modes
All Modes
Fault
Warning
Input voltage, input frequency, battery voltage, battery
Power, Backup time, output voltage, output frequency,
load Power and load percentage.
k: kilo, W: watt, V: voltage, A: ampere, %: percent, degC:
centigrade degree, Hz: frequency, min: minute
The UPS is connected to AC input.
When the icon is flashing, the UPS is regulating the
voltage (reducing or increasing the voltage).
The UPS is running on battery
The UPS alarm is disabled.
Battery level in ranges 0-24%, 25-49%, 50-74%, and 75-
100%.
Low Battery
Load level in ranges 0-24%, 25-49%, 50-74% and 75-100%.
Indicates overload.
Battery replacement needed or the battery is not
connected
Fault code (here: E14). Check troubleshooting for details.
Battery voltage is too high (i.e. wrong battery inserted)
Meaning LED Alarm
every
10 s
every every
0.5s 1s
every every
0.5s 0.5s
Contin every
uous 2s
Continu
ous
every
1.5s