Installation And Maintenance - Alfa Laval AlfaBlue Junior DG Manual De Instrucciones

Pay ATTENTION! to the following instructions to avoid serious injuries to people and / or damages to the
equipment.
ATTENTION! Before lifting the equipment:
1. Attach the belts or hooks, only to the provided elements the equipment is equipped with.
2. Be sure that the belts or the slings with hooks will lift the equipment in a balanced way.
3. Ensure that equipment is stable and properly balanced before lifting.

Installation and Maintenance

Before performing any maintenance operation, the mains power supply should be switched off, and
the safety switch should be in the OFF position to avoid accidents.
No personnel should walk on or step over the equipment, since this risks personal injury and damage to
the equipment.
Before attempting maintenance of the fans, make sure they are not running and the switch is in the
OFF position. When the operation is completed, replace the safety guards.
Fluid's Hazard
Ethylene Glycol is:
Flammable
Flammable
ENERGOEKONOM spol. s r.o., Wolkerova 433, CZ-250 82 Úvaly, Czech Republic, Tel.: +420 281 981 055, [email protected], www.energoekonom.cz
Lifting forks should be placed under
appropriate areas of the wooden
shipping skid.
Damage may result if the forks
come in direct contact with the
equipment.
Explosive at high temperature
Toxic by inalation
Wear protective clothing
Keep away from sources of ignition
No smoking
ALFABLUE JUNIOR - instruction manual
Ammonia is:
Avoid skin contact:
causes chemical burns.
SAFETY
5