Troubleshooting
Problem
The light will not turn on.
The fuse blows or circuit breaker trips
when light is turned on.
Care and Cleaning
EXTERIOR MAINTENANCE
Use a dry or slightly dampened clean
cloth and wipe the surface of the fixture.
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning
off the circuit breaker or by removing the
fuse at the fuse box.
Use a dry or slightly dampened clean
cloth to wipe the interior surface of the
fixture.
Solution
Make sure the power supply is on.
Test or replace the switch.
Check the wiring.
Replace the driver.
Check the wire connections.
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
8