Mint DMS300 Guia Del Usuario página 4

S E T U P I N S T R U C T I O N S
Setting up your Mondo Mint Digital Music Station is easy and quick with
the simple instructions below. You'll be listening to your music in just a
few minutes time.
MONDO MINT SPEAKERS
Set Up Each Mint Speaker
1. Install optional speaker feet (4) on the bottom of each
speaker. This helps protect your furniture from scratches.
2. Plug red speaker cable connector into the red
speaker post.
3. Plug black speaker cable connector into the black
speaker post.
Speaker Grilles
Speaker grilles snap on and off. You can use speakers with grilles off if you prefer. To best protect
your speakers, leave grilles on.
Speaker Position
Proper positioning of the speakers will enhance the sound quality of your Mondo Mint Digital
Music Station.
1. Place a speaker to the left and right of the amplifier. Make sure speakers are unobstructed.
2. Determine the area of the room where you want to get optimum quality sound. That's your
target space. Position each speaker the same distance from your target.
MONDO MINT AMPLIFIER
Set Up the Mint Amplifier
1. Plug speaker cable connectors from the right
speaker into right-side post on the back of the
Mint amplifier.
2. Connect red to red and black to black.
3. Connect the left speaker in the same way.
4. Plug the power cord into the Mint amplifier
and then into a wall outlet.
06 ENGLISH
S E T U P I N S T R U C T I O N S
Mondo Mint Amplifier Control Panel
POWER MUTE iPod USB
Power Button
1. Press power to turn the system on. The button will glow mint green and one of the source-
selection buttons will also glow green indicating that this music source is ready to play.
2. To turn power off, press mint green power button. The light will stop glowing and the Mint
system will turn off.
Volume Buttons
There are three buttons to control volume to the speakers: – (volume down) and + (volume up),
and mute. Volume and mute can be controlled by:
I
Mint amplifier
I
Mint remote control
I
Mint wireless dock (Mint wireless dock can control volume/mute for music played from your
iPod or your computer.)
Source-Selection Buttons
I
iPod – Plays your iPod while docked in the Mint amplifier.
I
USB – Plays music from your computer.
I
Wireless Audio – Plays your iPod while docked in the Mint wireless dock.
I
Line In – Plays devices connected through stereo headset jacks or RCA-type connectors.
(Cables not included.)
To choose a music source:
1. Make sure the power button is glowing mint green.
2. Select the source you want to play. When it is selected, it will glow green.
3. Be sure the music source is turned on and music is selected.
Mondo Mint Remote Control
The mini remote control has all of the same buttons that are
found on the Mint amplifier and they operate in the same
way. You can turn the volume up or down, mute your music
and select a source.
Before using the remote, remove the plastic safety tab.
Replace the battery when the remote stops operating normally
or its range seems reduced. For battery replacement and proper
disposal instructions, please see the Tips and Quick Fixes section
of this guide.
Warning: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Wireless
LINE IN VOLUME
Audio
ENGLISH 07