Section 1
Attach Grill Guard to Bumper
Step 1
539.47
473.18
Step 1
Place the Grill Guard #539.47 onto the Bumper,
aligning the bottom of the Grill Guard tubes
with the small holes in the top surface of the
Bumper. The light tabs should be on the rear.
Attach the Grill Guard to the Bumper using
four (4) M8-1.25x30 Hex Head Bolts, four (4)
M8 Washers #414.27, and four (4) M8 Split
Lock Washers #414.28.
Securely fasten all hardware.
P3 - 44944 Rev. A 1216
414.27
414.28
Two per Side
Installation Instructions - Grill Guard
Hardware
M8-1.25x30
Hex Head Bolt
Part #473.18
Qty. 4
M8 Flat Washer
Part #414.27
Qty. 4
Tools
Socket wrench
and 13mm
socket
M8 Split Lock Washer
Part #414.28
Qty. 4
Page 3
© 2016 Bestop, Inc.
