West Elm flat bar storage desk Instrucciones De Ensamblaje

Enlaces rápidos

flat bar storage desk
buffet de rangement plat
escritorio de barras planas para almacenaje
assembly instructions
instructions d'assemblage
instrucciones de ensamblaje
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
! Proper assembly of this item requires 2 people.
! outils nécessaires:
! Ne jetez pas le matériel d'emballage avant d'avoir terminé le montage.
! Montez cet article sur une surface lisse, telle que du carton ou un tapis, pour en protéger la finition
! Deux personnes sont nécessaires pour monter cet article de façon adéquate.
! Herramientas necesarias:
! No deseche los materiales de embalaje hasta terminar de armar el producto.
! Ensamble el producto sobre una superficie suave, como cartón o alfombra, para proteger su acabado.
! Se requieren 2 personas para armar adecuadamente el producto.
Parts
A
B
x1
x19
C
D
x4
x2
E
F
x4
x4
2237915/2237907- 03.29.10
Page 1 of 7
loading

Resumen de contenidos para West Elm flat bar storage desk

  • Página 1 ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
  • Página 2 Parts Cont’d instrucciones de ensamblaje 1. Align part #1 with part #2. insert bolt (A). Tighten with the sup- plied hex key.
  • Página 3 2. Lay the top (part 3) upside down onto a clean smooth surface such as carpet or cardboard. Align the assembled parts from step #1.
  • Página 4 3. Remove drawers from the assembled drawer box. Pull the drawers completely out. To remove the drawers you must release the locks on the drawer guides, by pressing down on the black tab on each drawer guide and pulling the drawer completely out of the drawer box.
  • Página 5 5. Align part #5 with the holes in the bottom of the drawer box. Insert bolt (A) and (C) into holes as shown.
  • Página 6 6. Insert bolt (C) into holes as shown. Tighten with the supplied hex key. With help fl ip the desk upright.
  • Página 7: Care Instructions

    7. Replace drawers. Align drawer guides on drawer with the drawer box. Press fi rmly to insert the drawer.

Este manual también es adecuado para:

22379152237907