Run Mode; Display Mode - Parker Controller Family Manual De Uso

9.2

Run mode

After being turned on, the switch is in run mode. The current values are
displayed. Two yellow LEDs indicate the current switching state of the
outputs. The switch runs through its monitoring routines, sets the switch-
ing outputs according to the configured parameters, and converts the
current measured values into analogue signals.
9.

Display mode

In display mode, the parameters can be shown but not changed.
To ensure trouble-free operation, the switch remains in run mode
internally. If no key is pressed in 30 seconds, the switch changes
automatically back to run mode.
1 Activate the display mode by pressing Enter
2 By quickly pressing the arrow keys
menu options.
 When the Enter
eters are shown. The password is shown as - - - -.
108
key is briefly pressed, the corresponding param-
. diSP appears.
or , you can scroll through the