Russell Hobbs 19630-70 Instrucciones página 3

diagrams
1 hook
2 filter
3 spout
3 Close the lid, and press down to lock it.
C SWITCHING ON
4 Plug the stand into the wall socket.
5 Put the kettle on the stand.
6 Move the switch to 1. The light will come on, and the kettle will heat up.
C SWITCHING OFF
7 When the water boils the kettle will switch off and the light will go out.
8 To switch off manually, move the switch to 0.
• Lifting the kettle off the stand will also switch the kettle off.
C GENERAL
9 To avoid the risk of splashing, pour slowly and don't over-tilt the kettle.
10 Don't tilt the kettle backwards, water might get on to the control area. If this happens, let the
kettle dry before use – sit it somewhere warm for 12 hours.
11 When you lift the kettle, you may see moisture on the stand. Don't worry – it's the steam
used to switch off automatically, which then condenses and escapes via vents under the
kettle.
12 You may see some discolouration on the floor of the kettle. Again, don't worry – it's due to
the bonding of the element to the kettle floor.
F USING WITH INSUFFICIENT WATER
13 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
14 To prevent the kettle cycling on and off, remove the kettle from the stand and let it cool
before replacing it on the stand.
C CARE AND MAINTENANCE
15 Unplug the stand, and let the kettle cool before cleaning.
16 Wipe all surfaces with a clean damp cloth.
17 Put a finger into the spout, and press the hook on top of the filter down and back, into the
kettle.
18 Rinse the filter under a running tap while brushing with a soft brush.
19 Fit the bottom of the filter into the slot at the bottom of the spout
20 Press the filter towards the spout, to lock the hook into the top of the spout.
Descale regularly, (at least monthly).
24 Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on
the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
4 lid
5 lid lock
6 handle
7 switch
3
8 light
9 stand