ShenPaz Focus 4010 Manual De Instrucciones página 3

Warning
ATTENTION!
Mount on non-flammable surface material only !
Take out the furnace with the assistance of two persons. To do so, each person will
take a side by holding the bottom of the furnace with one hand and the top side with
the other hand.
Do not pull out the furnace by its support in order to avoid damages.
CAUTION:
When operating the furnace a Refractory support must always be on the lift tray!
 During use, the area around the furnace table is hot; approach and contact with
the table should be only when the furnace is cold
 Dental work must only be placed on the furnace table.
Avoid placing or resting objects on any area of the furnace except the rest

In the event of an external power failure while the furnace is in operation:
1) Disconnect the power supply cord from the electrical power outlet.
2) Lower the table by inserting the crank supplied, into the hexagonal
screw located at the back of the furnace.
Caution!
Risk of electric
shock
FOCUS 4010/HT Dental Porcelain Furnace
ATTENTION!
PLEASE READ THE INSTRUCTIONS CAREFULLY
BEFORE OPERATING THE FURNACE.
table.
Caution!
Hot
surface!
Page 3
Caution!
Risk or Danger
Refer to documentati
Manual version 20.08.2015