Troubleshooting - BEMIS bioBidet HD-5000 Manual Del Propietário

TROUBLESHOOTING

Status Cause
Water is too Low water pressure of
low during the unit.
WASH/BIDET
Low water pressure of
water supply.
No water comes Water shut-off valve is
out during turned off
WASH/BIDET
Filter of the T-shaped
connector is clogged
Filter of water inlet
hose is clogged
Nozzle head is stuck
External water
pressure is low
Water is External water
dropping from pressure is too high
the bowl when
using the unit
Night light Low batteries
doesn't work
22
Solution
During use, turn the lever
forward or backward to
highest setting
If the water supply pressure
is too low, contact your
local water utility.
Turn on the water
shut-off valve
Clean the filter of the
T-shaped connector
Clean the filter of water
inlet hose
Take off and clean the
nozzle head
Increase the external
water pressure
The maximum water pressure
of the unit is 110 PSI. If the
water supply pressure is
above this, contact
your local water utility.
Water is too low during
WASH/BIDET
If any failure still occurs after above troubleshooting, please
contact [email protected] or call 847.458.2334.
Do not disassemble, repair, or remodel the unit, as this will
void the warranty.
23