Technical Data; Preventive Maintenance; Replacement Of Blades - 3TECH TS-12 Manual De Usuario

6. Technical data

Model Voltage / Hz
110V - 240V
National
50/60 Hz

7. Preventive maintenance

In order to avoid the risk of injuries such as accidental burns, unplug the equipment and
wait for the sealing bar to cool down before performing any maintenance procedure.
Cleaning
For an efficient cleaning, which must be done on a daily basis, use on the external side
of the equipment a humid cloth with biodegradable neutral detergent, after it, clean with
a cloth dampened with alcohol 70% or peracetic acid at 1%. Periodically search for paper
stuck in the blade's guide slot.

Replacement of blades

BE CAREFUL WHEN HANDLING THE BLADES! Place the blade holder at the center
position, push the guide (Fig. 5) and take the blade holder out (Fig. 6). Support the holder
on the guide (Fig. 7) and take out the screws. Take out the old blades (Fig. 8), place the
new ones (n° 23) and repeat the process inversely. To put back the blade holder, place it at
the center position, verify if the tip of the blades is centered to the guide slot and press it
down.
Fig. 5
Never perform sealing with the plastic side downwards to avoid trouble with
access of plastic material on the heater.
Sealing Area
Power
(width)
180 W 30 cm
Fig. 6
Sealing Sealing
Thickness Temperature
12 mm 175°C to 180°C
Dimmensions
Weight Net
(cm)
(package) 45
x 12,5 x 31
(sealer) 44,2 x
12,5 x 30,5
Fig. 7
Gross
Weight
3,3 kg
2,9 kg
Fig. 8
9