Jabra BT200 Manual Del Usuario página 8

b) Pairing Headset to the Phone
1. Verify the power of the mobile phone to be paired with is ON, and that the headset is
in pairing mode (as above). During pairing it is recommended that the headset and
phone (or device) are not more than 1 metre apart – with no solid objects in between.
2. Perform a "device discovery"from the mobile phone. For details on device discovery
consult your phones user guide.This is usually done in the phone's Bluetooth menu – Set
Up – Device Discovery. Please Note: it may take several seconds to establish connections.
3. The phone's display will advise that it has found the 'JABRA BT200' headset and ask
you to confirm that you want to pair with it. Confirm this.
4. Enter the passkey 0000 , when your phone menu prompts you, and the phone will start
to pair the headset with the phone (the device ID is now stored in the phone's memory).
5. Your phone screen will advise that pairing has been successful, and the blue LED on
your headset will flash fast On/Off when Bluetooth pairing has been established.
6. If the pairing fails and the blue LED on the Headset stays On, pairing was unsuccessful
you will need to turn the headset Off and follow the steps again. (Your phone screen
will also give the status.)
7. Once the headset and phone have successfully paired – you are ready to place and
receive calls. (see section "Making a Call" . )
14
a) Making a call with the headset
There are different ways to make a call using your JABRA BT200 headset. (In each case
you will need to make sure that you pair / link your headset and phone as described
on page 13.) When on a call the Headset LED will flash blue at 1-second intervals.
If your mobile phone supports voice dialing, you can use this feature with the headset.
Please refer to your phone's user guide for more information on voice control.
Making a Call from the Mobile Phone
1. Place the headset on your ear in the desired wearing style.
2. Using the phone's keypad, dial the phone number.
3. To send the call, press the phone's SEND / CALL key – the phone initiates the call.
4. The call will then transfer automatically to the headset when connection is made.
Making a Call Using Voice Dialing (Voice dialing on your phone must be turned
On and voice tags stored.)
1. Place the headset in the desired wearing style.
2. On the Headset - Press the Multi Function Button.
3. A short tone will prompt you to say the name of the person you wish to call (as
entered in the phone's voicedial phonebook directory). Speak the voice 'tag' name.
15