POLYPOOL PP3130 Manual De Instrucciones página 6

132 mm 35 mm
Cod. 3130-3136-3138
INSTRUCTIONS:
• Before operating on the system, remove voltage via the main switch
• Before making holes, make sure they do not damage the pipes, cables or other utilities of the building.
• The elements of this product do not require maintenance. If parts are damaged, disconnect from the
mains and stop use.
• Note: The retaining screws are not provided. Please use the appropriate retaining screws.
Remove the bracket from the light
1
Re-attach the bracket to the light
4
Unscrew the hexagonal head fairlead under the door
and the cable tie. Insert the cable and connect the
terminals as shown. Tighten the screws of the terminal
and those of the cable tie. Re-screw the hexagonal
screw. Close the door again. Loosen the nuts of the
bracket to move the light into the desired position are
the colours of the wires in the figure.
7
The PP3138 model is fitted with cable and does not require wiring.
187 mm 39 mm
Cod. 3131-3137
Mark the wall with the appropriate
fixing positions.
2
Use rubber cable
(e.g. H05RN-F 3x1mm2)
5
230 mm 39 mm
Cod. 3132
Fit the bracket on the wall
3
Open the door of the junction
box
Rubber ring
6
Rubber ring
303 mm 44 mm
Cod. 3133
Brown A./G.