Alignment; Configuration And Operation; Important; P Type (Preset) - Cedes TOF/Spot-Safety Manual Del Usuario

TOF/Spot-Safety
5.2

Alignment

As the detection area of the TOF/Spot-S looks like a square,
it is important to know where the flat borders and where
the edges are:
6.

Configuration and operation

There are different TOF/Spot-S types available. Some of them need to be set manually, others are factory set.

IMPORTANT

The sensor uses a ±40 mm (±1.57 in)
hysteresis. The hysteresis is the difference
between the switching points changing the
status from "free field" to "object detected"
and back from "object detected" to "free
field" compared to the nominal limit.
6.1

P type (Preset)

The P type needs no configuration; a specific detection range is factory set according customer request. Due to the preset
value, the P type is a pure plug-and-play sensor.
Preset range
Figure 12: Configuration - P type
© CEDES | V 4.0
LED bright
LED dimmed
Important:
 For proper functionality, the remission range of the
background or the object has to be between 2 ... 90%.
 Do not use high reflective, retro-reflective or mirroring
backgrounds or objects. They can lead to malfunction
of the sensor due to the emitted beam not being
directly remitted back to the sensor, which leads to
measurements out of the operating range.
 The threshold distance must be manually tested after
the Teach-in.
English
7