Hardware Installation - Conceptronic 150N Manual Del Usuario

Nr Description
1 USB connector
2 Ventilation holes
3 Activity LED
4 WPS button
Before you can install the drivers & software, you need to connect the 150
computer.
•
Turn on your computer.
•
Plug the 150 Wireless USB Adapter into a free USB port on your computer.
N
The computer will recognize new hardware and shows the 'New Hardware Wizard'.
•
Ignore this wizard or click on "Cancel" to close this wizard.
You can now proceed with the driver & software installation, described in chapter 4.
Note: When using Windows 7, you may skip chapter 4, since windows 7 will automatically install the
needed native drivers. However, when using these native drivers, the WPS functionality and the
Conceptronic Wireless Network Config Utility are not available. When you choose to skip chapter
4, you can also skip chapter 5.1 ~ 5.4 and continue to chapter 5.5.
2. The C150RU explained
Top
1
2
3
Status
-
-
Flashing consistently
Flashing randomly
-

3. Hardware installation

1
4
Explanation
Connect the C150RU to your computer.
Breathing holes for ventilation.
The adapter is not connected to a network.
The adapter is connected to a network and
sending or receiving data.
Press to start the WPS function.
N
ENGLISH
Bottom
Wireless USB Adapter to your
11