Steren ELI-1230 Manual De Instrucciones
Steren ELI-1230 Manual De Instrucciones

Steren ELI-1230 Manual De Instrucciones

Eliminador universal regulado 1,2a con conectores usb
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Before using your new 1.2 AMP USB/AC/DC Regulated power adapter,
read carefully this user's manual to prevent any damage.
Before connecting your converter check that the electrical network is 110/220V~ 60/50Hz,
the one used in Mexico.
Do not select a voltage higher that the one required by the electronic device on your
converter.
It is recommended that you select a voltage lower than the voltage set on your equipment.
Do not use or store this equipment in places where there are leaks or water spattering.
This can cause a malfunction or an electric shock.
Don´t try to open the equipment, this can cause a malfunction and void the warranty.
If the power cord is damaged, go with an authorized distributor for its replacement.
Disconnect the voltage converter before cleaning it. Always use a soft dry cloth to clean
your equipment.
Do not expose your equipment to the direct sunlight or extreme temperatures.
Highlights
The USB/AC/DC regulated power adapter includes a mini USB connector, one female USB
"A" connector, one 4 pin mini USB and 6 different inverted male connectors (inverted plug)
which you can interchange between them and a green-light voltage selector.
The input comes from 90 to 240Vac (50 or 60hz) and output from 3, 5, 6, 7.5, 9 and 12 Vcc.
The maximum output is 1.2 Amp, and the cable length is 1.8 metres. Manufactured in black
colour plastic. It is perfect to use it in mobiles, discmans, video cameras and computers.
Regulated voltage.
5V output (USB).
Luminous control.
9 different connectors.
1.- Choose the voltage selector the amount of voltage
required by your electronic equipment, it may be:
3/4.5/6/7.5/9/12V---.
2.- Choose a type of connector suitable for your
electronic equipment.
3.- Insert the connector you have chosen to the power cable. It is important to verify the
polarity of your electronic appliance and that you select the same in your power adaptor:
if your equipment requires positive polarity match the TIP sign of the power cable with the
symbol (+) of the connector so that the center is positive.
4.- Connect the power adaptor to the outlet, immediately the voltage selector will turn on.
5.- Insert the connector appropiate for your electronic equipment.
6.- Turn on your electronic equipment.
Important
Operation
7.- To connect a USB device, plug one of the three tips to the power cable labeled USB.
This cable will provide 5V continuously and not be affected by the voltage selector switch.
The eliminator is designed to feed a single device at a time. Using two power cables can
lead to overheading.
Three USB tips can only be used in the power cord labeled "USB". Do not try to force
them. Similarly, the points "not USB" are designed for use with the cable marked "ELIM".
If you connect the USB cable, there may be a false contact and will damage you device.
Troubleshooting
When the equipment doesn´t turn on:
1.- Check that the converter cable isn´t damaged.
2.- check that the plug is appropriately making contact with the outlet.
3.- Make sure that the voltage selector is in the correct position according to your electronic
device.
4.- Check that your outlet device.
When the tip does not fit your equipment:
1.- Check that the connector is suitable for your equipment, otherwise search for the correct
one among different connectors.
Specifications
Input:
90-240V~ 50-60Hz 20W
Output:
3/5/6/7,5/9/12V--- 1,2A
5V--- 1A (through USB port)
Nominal consumption:
11.52 kWh/month
Stand-by power consumption:
0.324 kWh/month
Product design and specifications are subject to change, without notice.
Product: 1.2A USB/AC/DC regulated power
adapter
Model: ELI-1230
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product
box or package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was
received.
4.- Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
Cautions
WARRANTY
CONDITIONS
In case your product fails
or have questions, please
contact your nearest dealer.
If you are in Mexico, please
give a call to our Call Center.
Call Center
01 800 500 9000
loading

Resumen de contenidos para Steren ELI-1230

  • Página 1 The maximum output is 1.2 Amp, and the cable length is 1.8 metres. Manufactured in black This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase.
  • Página 2 Electrónica Steren S.A. de C.V. discmans, videocámaras y computadoras. 2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.