Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Product Assemblies
SP-MUB-14-W
Place frame in cabinet as shown. Position
1
front rail of frame back 1-3/4 inches from
the front edge of the cabinet. Frame must
be straight and square to ensure smooth
operation of basket.
2
Attach frame to cabinet with four screws.
Place basket on frame so the bottom two
3
horizontal wires are at the back. Tip basket
slightly as shown and guide wire into front
of frame. NOTE: Basket is reversible and can
be placed with either short end in front.
Lower front of basket to place second
4
horizontal wire into slot on frame as shown,
then slide basket completely into frame.
Grand Rapids, MI
800.253.1561
simplyputorganizers.com
Inspect all parts and read all instructions prior to beginning assembly and installation.
Tools Required
• Phillips Head Screwdriver
• Drill with 1/16" (1,5 mm) bit
for drilling pilot holes
Parts Included
Basket (1)
1
3
©2018 Knape & Vogt. All rights reserved. Knape & Vogt
Slide Out Basket
Installation Instructions
Frame (1)
Screws (4)
2
1-3/4"
Front
4
Horizontal
wire
reserves the right to change specifications without notice.
®
Front
Horizontal
wire
310669/0718
Manuales relacionados para simplyput SP-MUB-14-W
Resumen de contenidos para simplyput SP-MUB-14-W
- Página 1 Parts Included Basket (1) Frame (1) Screws (4) Product Assemblies SP-MUB-14-W Place frame in cabinet as shown. Position front rail of frame back 1-3/4 inches from the front edge of the cabinet. Frame must be straight and square to ensure smooth operation of basket.
- Página 2 Bastidor (1) Tornillos (4) Assemblages Ensamblaje de productos SP-MUB-14-W Coloque el bastidor en el armario como se muestra. Coloque el riel frontal del bastidor de nuevo a 4,4 cm del borde frontal del armario. El bastidor debe ser recto y cuadrado para asegurar que la cesta se deslice correctamente.