Nexxt Solutions X4YHADSW100 Manual Del Usuario página 7

Note: a single bare copper wire is also used to
represent the ground wire in existing electrical installations.
Europe/Australia color code standard:
Blue is for neutral, brown represents the live and load
wires, and the yellow/green cable is for grounding.
Note: a single bare copper wire is also used to
represent the ground wire in existing electrical installations.
Load
Line
Step 4
Connect the smart dimmer switch
- Using the correct polarity, match each wire from the smart
dimmer switch with those coming from the junction box.
- Connect the wire ends of each pair into the wire nut, then
twist each nut full turns until the connection is fully
secured. Repeat this step for each cable assembly.
Note: make sure that there is no wire exposed.
Special care must be taken to follow the correct wiring
con guration:
1) Neutral wire (white) on the smart dimmer switch to
neutral on junction box.
2) Ground wire (yellow/green) on the smart dimmer switch
to ground on junction box (ground wire maybe
yellow/green or bare copper wire) depending on existing
electrical installation.
3) Line/Live wire (black) on the smart dimmer switch to line
/live wire on junction box.
4) Load wire (red) on the smart dimmer switch to load wire
on the junction box.