Troubleshooting - SEB BeerTender VB31 Manual Del Usuario

Problem
The appliance does not
come on.
The upper part of the
dispensing head is not
properly positioned.
No beer is being dispensed.
You cannot close the upper
part of the dispensing head.
42

Troubleshooting

Possible causes
The appliance is not
connected to the mains
power supply.
The Beertender Keg tap
®
has been activated by hand.
The Beertender Keg tap
®
or tube is not inserted
correctly.
The Beertender Keg is
®
empty.
There is no keg inside the
Beertender appliance.
®
The Beertender appliance
®
tap handle is not correctly
installed/positioned.
The upper part of the
dispensing head was
improperly positioned.
Remedies
Connect the appliance to
the power supply.
Put the Beertender
®
back in its original position.
Remove the Beertender
Keg tap from the appliance
and fit it again following
section: Using the
Beertender .
®
Replace the Beertender
Keg with a new one.
Install a keg inside the
Beertender appliance.
®
Install/position the tap
cover correctly.
Properly position the upper
part of the dispensing head.
Keg tap
®
®