REPLACING THE REMOTE BATTERY
NOTE:
The battery used to power your remote is a coin-shaped
3V cell battery (CR2032). Additional batteries are not included.
1. To remove the back cover of the remote, use a small
screwdriver to remove the battery screw. Gently slide the back
cover up to disengage it, then lift it away from the remote.
2. Remove the old battery from the circuit board by sliding it
diagonally out of the bracket holding it down. Place a new 3V
cell battery in the bracket with the "+" positive side showing.
3. Replace the back cover of the remote, and secure the
battery screw.
INSTALLING A WALL MOUNT CARRIER
NOTE:
A wall mount carrier is included with your remote, but it is optional to install it. If
you choose to mount the carrier with the adhesive patch on the back, be sure to clean and
dry the mounting surface first.
1. Determine where you'd like to place your remote carrier in the room. It is common to
place it near a light switch, or on the wall next to the window.
2. With the carrier in the upright position, insert the provided screws to secure it to our
mounting surface. For the adhesive patch, firmly press the carrier to the surface for about
30 - 45 seconds.
CLEANING INSTRUCTIONS
NOTE:
All fabrics are different and some may be easier to clean than others. We recommend cleaning your shades as often as once a month.
Here are some general guidelines on how to do so:
1. For regular maintenance, use a duster or a vacuum with a brush attachment and run it over the front and back of the shade.
2. To spot clean stains, use a damp rag with a very mild, gentle detergent or soap. Dab at the affected spots; do NOT rub! Let the dampened area
air-dry and repeat as necessary.
3. If your roman shade has wrinkles, you can use a basic steamer to remove them. Hold the steamer roughly six inches away from the fabric and
wave the steamer back and forth over the wrinkled areas.
WARRANTY AND REPLACEMENT
To learn more about our product warranties, please visit:
For replacement parts, and/or to file a warranty claim for a product that is damaged, defective, or missing parts, please call our Customer Care
CHILD SAFETY WARNING
WARNING
Corded window blinds and shades can be a strangulation risk or cause serious injury to young children and pets. When using
corded window treatments, use the following tips to keep them safe:
• Move furniture that children can climb on away from the window.
• NEVER place a crib by a window!
• Keep cords up and away from your child's reach.
®
Simple. Smart. Custom.
https://www.selectblinds.com/warranty.html
INSTALLATION GUIDE | ROMAN SHADES
SCREW HOLE
ADHESIVE PATCH
(BACKSIDE)
SCREW HOLE
• Always use cord cleats with corded products.
• Secure child-safe tensioners for continuous cord loop
chains to the wall or window encasement.
UPDATED SEPTEMBER 2020
Lithium Cell
CR2032
3V
5