3. Pre-drill the screw holes for each bracket with a 5/64" drill bit.
Align the brackets with the holes, and use a Phillips drill bit to fasten
the 1 1/4" screws into place.
4. Rest the bottom of the headrail on top of the brackets so that
the holes align. Use your drill to insert the 3/4" screws into the pre-
drilled holes of the headrail.
5. That's it! With the shade now secure, follow any additional steps
necessary to complete your installation.
A. Pair the remote with one or multiple shades (page 2 - 3).
B. Adjust the upper and lower limits if you are not satisfied with
the factory default settings (page 3).
C. Program your shade to automatically raise or lower to your
favorite intermediate position (page 4).
2.
PROGRAMMING AND USING YOUR REMOTE
WARNING:
DO NOT attempt to raise or lower your motorized shade with your hands. This may cause permanent damage to the motor, and other
components in the headrail, which may not be covered under your warranty.
CHANNEL
UP
STOP
DOWN
CHANNEL
DECREASE
CHANNEL
INCREASE
1-CHANNEL REMOTE
PAIRING A SINGLE SHADE TO A CHANNEL
1. Press the CHANNEL INCREASE or CHANNEL
DECREASE button on the remote to select a dedicated
channel for the first shade you're pairing with the
remote.
2. Locate the MOTOR HEAD on the left end of the
roller tube under the headrail. Press and hold the
PROGRAM button until you hear a beep and the shade
"jogs" quickly up and down.
3. Press the UP button on the remote and the shade will jog again.
4. Congrats! Your shade and remote are now paired. Repeat this process for any additional shades you want to pair with the remote, selecting a new
channel (if using a multi-channel remote) before you begin.
®
Simple. Smart. Custom.
OPERATIONAL FUNCTIONS
1
2
3
4 5 6
DISPLAY
UP
STOP
DOWN
6-CHANNEL REMOTE
PROGRAM
BUTTON
INSTALLATION GUIDE | ROMAN SHADES
BACK
CHANNEL
DISPLAY
UP
STOP
CHANNEL
DECREASE
DOWN
CHANNEL
INCREASE
16-CHANNEL REMOTE
MOTOR HEAD
FRONT
PROGRAMMING FUNCTIONS
PROGRAM
BUTTON
BATTERY
SCREW
BACKSIDE OF REMOTE
1
2
3
4 5 6
UPDATED SEPTEMBER 2020
2