Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
PACKAGE CONTENTS
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shad-
ed areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location
is away from other nighttime light sources such as street or porch lamps. These
light sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Prepairing for installation
□
FOR FIRST TIME USE: Remove the pull tab between the top cover (A)
and the housing (D).
□
Firmly slide the post (E) to the solar housing (D).
Use and Care Guide
Solar LED Path Light
A
B
A
D
D
E
C
D
Part
A
B
300 mAh LiFePO4, 14430 rechargable
battery (pre-installed)
C
D
E
F
2
Install the solar path light in the
ground
NOTE: Do not use a hammer. If the ground is hard, use water to soften or a
trowel to loosen the soil.
□
Attach the post (E) to stake (F).
□
Push the assembly firmly into the ground.
1
Please contact
Item #xxx-xxx
Model #29839
E
F
Description
Top cover
Battery Cover
Housing
Post
Stake
E
F
HAMPTONBAY.COM
for further assistance.
1-855-HD-HAMPTON
Quantity
6
6
6
6
6
6
Manuales relacionados para HAMPTON BAY 29839
Resumen de contenidos para HAMPTON BAY 29839
- Página 1 Use and Care Guide Solar LED Path Light Item #xxx-xxx Model #29839 PACKAGE CONTENTS PLANNING FOR A SUCCESSFUL ASSEMBLY Part Description Quantity Top cover Read all instructions before assembly and installation. 300 mAh LiFePO4, 14430 rechargable Inspect each part for defects that may have occurred during shipping.
- Página 2 Maintenance Replacing the battery CAUTION: When replacing the battery, use one (1) 300mAh LiFePO4, 14430, 3.2V rechargeable battery. IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable 3.2V LiFePO4 battery of 300 mAh or greater every 3 years or when performance diminishes.
- Página 3 Guía de uso y mantenimiento Lámpara LED solar Artículo núm.: xxx-xxx para senderos Modelo núm. 29839 CONTENIDO DEL PAQUETE CÓMO PLANIFICAR UN ENSAMBLAJE Pieza Descripción Cantidad EXITOSO Cubierta superior Lee todas las instrucciones antes de ensamblar e instalar. Batería recargable de fosfato de litio 14430, de 300 mAh (preinstalada) Verifica que ninguna de las piezas haya sufrido daños durante el envío.
- Página 4 Mantenimiento Cómo reemplazar la batería PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable de Fosfato de Litio 14430, de 300 mAh y 3.2 V. IMPORTANTE: Desecha las baterías conforme con las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplaza con baterías recargables de fosfato de litio de 3.2 V cada 3 años o cuando el rendimiento disminuya.