General Safety Rules; Features; Intended Use - Urrea NL2E Manual De Usuario

GENERAL SAFETY RULES

Working safely with the measuring tool is pos-
sible only when the operating and safety in-
formation are read completely and the instruc-
tions contained therein are strictly followed.
Never make warning labels on the measuring
tool unrecognizable. SAVE THESE INSTRUC-
TIONS.
CAUTION: The use of other operating or
adjusting equipment or the application of
other processing methods than those men-
tioned here, can lead to dangerous radiation
exposure.
• Do not direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This measuring tool produces laser
class 2 laser radiation according to IEC 60825-1.
This can lead to persons being blinded.
• Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualization of the laser beam, but
they do not protect against laser radiation.
• Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and re-
duce color perception.
• Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
• Do not allow children to use the laser mea-
suring tool with- out supervision. They could
unintentionally blind other persons or them-
selves.
• Do not operate the measuring tool in explo-
sive environments, such as in the presence of
flammable liquids, gases or dusts. Sparks can
be created in the measuring tool which may
ignite the dust or fumes.
+ Keep the measuring tool away from cardiac
pacemakers. The magnets 7 generate a field
that can impair the function of cardiac pace-
makers.
+ Keep the measuring tool away from mag-
netic data medium and magnetically-sensitive
equipment. The effect of the magnets 7 can
lead to irreversible data loss.
E N G L I S H •

FEATURES

INTENDED USE

The measuring tool is intended for horizontal
and diagonal alignment of tiles and laminate
flooring panels.
The measuring tool is suitable for operation
exclusively in enclosed work sites.
KNOW YOUR TOOL
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1. On/Off switch.
2. Exit opening for laser beam.
3. Spirit levels for vertical and horizontal align-
ment.
4. 90° scale with 5° graduation.
5. T-Edge for alignment.
5
4
1
6. Laser warning label.
7. Magnets.
8. L-Edge for alignment.
9. Latch of battery lid.
10. Battery lid.
5
8
11
11. Bottom plate.
12. Wall holder.
13. Laser viewing glasses*
* The accessories illustrated or
described are not included as
standard delivery.
U se r's m a n ua l
2
3
10
7
6
12
7