Operation; Practical Advice - Gardena AL 1810 CV P4A Manual Del Usuario

2. OPERATION

To charge the battery [ Fig. O1 / O2 ]:
CAUTION!
v Note the mains voltage! The volt-
age of the power source must
match the voltage specified on the
rating plate of the charger.
1. Connect the battery charger
a mains socket.
2. Slide the battery charger
(B)
battery .
Meaning of the indication elements:
Indication on the charger:
Flashing of the
Battery Charge
(Lc)
Indicator
Continuous lighting
of the Battery
(Lc)
Charge Indicator

Practical advice:

When the charger is used continuously,
or for several consecutive charge cycles
without interruption, the charger may
heat up. This is, however, harmless and
12
(C)
into
(C)
onto the
The charging procedure is indicated by flashing of the battery charge
(Lc)
indicator .
Note: The charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 6. TECHNICAL DATA.
Continuous lighting of the battery charge indicator
the battery is fully charged or that the temperature of the battery is not
within the allowable charging temperature range and can therefore not
be charged.
When the battery is not inserted, continuous lighting of the battery
(Lc)
charge indicator indicates that the mains plug is inserted in the
socket outlet and that the battery charger is ready for operation.
The battery is not included with the
product as standard. You can find the
complete selection of accessories in
our accessories range.
Thanks to the intelligent charging pro-
cess, the charge condition of the battery
is automatically detected and then
charged up with the optimal charge
current depending on battery tempera-
ture and voltage.
In this way, the battery is treated with
care and remains permanently fully
charged when it is stored in the charger.
does not indicate that the charger has
a technical defect.
A significantly reduced operating time
after charging indicates that the battery
has deteriorated and must be replaced.
(Lc)
indicates that