Glacier bay PPMDSJVM30MS Guía De Uso Y Cuidado página 6

Installation (continued)
4
Installing the vanity top
□ Apply silicone caulk/sealant (not included) to all four
corners of the vanity cabinet (B).
□ Place the vanity top (A) onto the vanity cabinet (B).
□ Position the vanity top (A) so that it has an equal
amount of overhang on each side, and use a level to
ensure the vanity top (A) surface is level.
□ Apply silicone onto the seam between the edge of
the vanity top (A) and the wall, smooth the bead,
and allow to cure before use.
IMPORTANT: Do not use plumber's putty.
NOTE: The faucet, drain, and supply lines are
not included. Install these parts to the vanity top
according to the manufacturer's instructions.
5
Installing the knobs
□ Attach the knobs (AA) to the vanity cabinet (B) with the
provided knob screws (BB).
6
Installing the hanging bracket
on the mirror
NOTE: Before installing, make sure all parts
are present. Compare parts with the Hardware
Included list. If any part is missing or damaged,
do not attempt to install the product.
□ Attach the hanging brackets (DD) to the back of
the mirror (C) using the included screws (CC).
A
B
AA
CC
DD
6
BB
B
C