Glacier bay TTART-CHT Guía De Uso Y Cuidado

TOOLS REQUIRED
Claw hammer Safety goggles
Measuring tape Wall hardware
Installation
1
DETERMINING THE MOUNTING LOCATION
NOTE: Before installing, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
□ Determine the desired mounting location, and mark
the wall where the unit will be installed.
3
INSTALLING THE CABINET
□ For wall stud installation, insert #12 x 3 in. screws with washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate locations and insert toggle bolts with washers
(not included).
□ For concrete wall installation, drill 1/4 in. holes at the appropriate locations and insert #12 wall
anchors, followed by #12 x 3 in. screws (not included).
Use and Care Guide
Bath Storage Cabinet
Phillips screwdriver
Level
HARDWARE INCLUDED
AA- Knob
Power drill
x 2
2
PREPARING THE CABINET
□ Drill 1/8 in. diameter holes through the back
panel of the cabinet on all four corners.
Item #1000 958 631
Item #1000 877 746
Item #1000 877 451
Item #1000 722 628
Item #1000 285 636
Item #1000 997 509
Item #1000 720 355
Item #1000 992 889
Item #1000 285 347
Item #1000 997 504
Item #1000 661 881
Model #TTART-CHT
Model #TTMEL-CHT
Model #TTC-ACO
Model #TTH-NHK
Model #TTH-OA
Model #TTH-WH
Model #TTC-CHR
Model #TTG-JVO
Model #TTDM-WH
Model #TTS-OA
Model #TTE-JVO
BB - Knob Screw CC - Shelf Clip
x 2
DD - Shelf x 2
HOMEDEPOT.COM
Please contact 1-855-434-5224 for further assistance.
x 4