Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DUCT COVER REQUIREMENTS
Duct cover kits must be purchased separately.
We recommend that the vent hood and duct cover
(if used) be on site before final framing and wall
finishing. This will help to accurately locate studs,
ductwork and electrical service.
• Duct cover accessory comes with a lower and upper
duct cover and installation hardware.
• The installation hardware includes mounting
brackets to secure duct covers to the wall.
• The lower duct cover alone can be used and must
be secured with the duct cover bracket.
• See table below for duct cover kit part numbers
based on model.
Model
36" Model
ZX10D13SPSS
ZX12D13SPSS
48" Model
ZX10D14SPSS
ZX12D14SPSS
• See the next page for duct cover installation height
information.
6
Installation Preparation
Max Ceiling
Duct Cover #
Installation
ZX8D13SPSS
8' 4"
10' 8"
12' 8"
ZX8D14SPSS
8' 4"
10' 8"
12' 8"
INSTALLATION DIMENSIONS
The hood duct covers can be adjusted for different
ceiling heights depending on the distance between the
bottom of the hood and the cooktop (distance X). See
Installation Height Table.
1" Min.
16-1/2"
Max.
20"
18"
Required Min & Recommended Max Ceiling
Height Examples for 10' Duct Cover Kit
Electric
Gas
X = 24"
X = 30"
X
Y = Min 8' 3"
Y = Min 8' 11"
Max 9' 6"
X = Distance from hood to cooktop. (Varies
depending on the installation) Required 24"
minimum over electric range or 30" minimum over
gas range. The recommended maximum is 36".
36"
Typical Range
or
38"
NOTE: 36" for typical
electric range and 38" for
gas range.
Upper Duct
Cover
Lower Duct Cover
(Vented)
X = 36"
Y = Min 9' 5"
Max 10' 2"
Max 10' 8"
31-2000734 Rev. 4
Y
Tabla de contenido
