Flexible Zone; Advice On Using Cookware; Warnings; Consisting Of Two Independent Zones - NEFF M52 Serie Instrucciones De Uso

Flexible zone

This may be used as a single zone or two individual zones
depending on the cooking needs in each situation.
It consists of 4 independently-controlled inductors. When the
flexible zone is working, only the zone covered by the cookware
is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:

As one hotplate

Diameter less than or equal to 13 cm
Place the cookware on one of the four posi-
tions shown in the image.
Diameter greater than 13 cm
Place the cookware on one of the three
positions shown in the image.
If the cookware takes up more than one hot-
plate, place it at the top or bottom edge of
the flexible zone.
As two independent hotplates
The front and back hotplates, each with two
inductors, can be used independently by
selecting the necessary power for each
one. In this case, it is recommended to only
use one pan on each hotplate.

Warnings

When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
24
To obtain maximum power with the
Powerboost Function, place the
cookware in the centre of the flexi-
ble zone when used as a single hot-
plate.
On hobs with more than one flexible
zone, it is not recommended to use
several zones at the same time for a
single pan.

Consisting of two independent zones

The flexible zone can be used normally as two independent
hotplates.
How to activate
See "adjusting the hotplate" section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
Place the cookware and select the desired power level with
1.
one of the two controls in the flexible zone.
The power level lights up on the hotplate indicator that has
been activated with the control.
Press the ð symbol. The indicator lights up.
2.
The flexible zone has been activated.
Changing the power level
Use the same control as above to change the power level.
Adding more cookware
Place the new cookware and press the
will be detected and the previously selected power level will be
maintained.
Notes
If you place new cookware and do not press the
■
the new cookware will not be detected.
If the pan on the hotplate that is switched on is moved or
■
removed, the hob will perform an automatic search and the
previously selected power level will be maintained.
How to deactivate
Turn the control to the 0 setting.
The flexible hotplate has been deactivated.
Note: If you turn the control which has not been used to select
the power level, the flexible zone is deactivated. In this case,
the two hotplates are locked with the
power level indicators until the two controls return to the 0
setting.
Return to using two hotplates
Turn the control to the 0 setting. The flexible zone can be used
once again as two independent hotplates.
Note: When a hob is switched off and later switched on again,
the flexible zone will again be used as two hotplates.
symbol. The new pan
ð
symbol,
ð
‹ symbol flickering on the