Enlaces rápidos
Door Preparation
If your door requires drilling, use the supplied template below with the door preparation
instructions available at www.baldwinhardware.com
TEMPLATE
Centerline
Ligne médiane
Linea central
2-3/8" 60mm
2-3/4" 70mm
Fold
Doble
Plier
Centerline
Ligne médiane
Linea central
Fold
Doble
Plier
2-3/8" 60mm
2-3/4" 70mm
WARNING: This Manufacturer advises that no lock can provide
complete security by itself. This lock may be defeated by forcible
or technical means, or evaded by entry elsewhere on the property.
No lock can substitute for caution, awareness of your environment,
and common sense. Builder's hardware is available in multiple
performance grades to suit the application. In order to enhance
security and reduce risk, you should consult a qualified locksmith
or other security professional.
Ø 2-1/8"
(54 mm)
Ø 2-1/8"
(54 mm)
Ø 5/16"
(8 mm)
68596-001 Rev 02
www.baldwinhardware.com • Customer Service 1.800.437.7448
Parts in the Box
Exterior
Interior
handleset
mounting
escutcheon
assembly
plate
1. Install trim
Only use if
included in
the box.
2. Install interior escutcheon
3. Install knob/lever
Place lever or knob onto chassis and
turn set screw clockwise to secure.
Full Dummy Handleset
Installation Instructions
Fits 1-3/4" (44 mm) up to 2" (51 mm) doors
(Thick door service kits for
2-1/4" (57 mm) up to 2-1/2" (64 mm) doors
available and can be purchased separately.)
66479
Lever
47031
47063
66199
Interior
Please note: Product illustrations
may differ from your product.
Installation is the same.
Tighten screws evenly.
DO NOT overtighten screws.
Note: use longer screws
supplied in Thick Door
Kit for doors between
2-1/4" (57 mm) to
2-1/2" (64 mm)
Tighten screws evenly.
DO NOT overtighten screws.
The set screws are pre-installed.
They do not need to be removed
prior to knob/lever installation.
Copyright © 2020 Spectrum Brands, Inc.
Manuales relacionados para Baldwin 68596-001 Rev 02
Resumen de contenidos para Baldwin 68596-001 Rev 02
- Página 1 (Thick door service kits for TEMPLATE 2-1/4" (57 mm) up to 2-1/2" (64 mm) doors available and can be purchased separately.) 68596-001 Rev 02 www.baldwinhardware.com • Customer Service 1.800.437.7448 Ø 2-1/8" (54 mm) Parts in the Box...
- Página 2 Instructions d’installation de l’ensemble serrure complet Préparation de la porte/ Preparación de la puerta Instrucciones para la instalación del juego de manija fija Si votre porte a besoin de forage, utiliser le gabarit fourni ci-dessous avec les instructions S’ajuste sur des portes de 1-3/4" (44 mm) jusqu’à 2" (51 mm) de préparation de la porte se trouvant sur le site www.baldwinhardware.com Para puertas de 1-3/4"...