Overview; Installing The Interphone; Installing The Velcro Attached To Interphone Headset; Installing The Interphone Headset - Cellular Line BTEASYCOM Manual De Instrucciones

2. overview

vol– - Turn down the volume and send out
1
intercom
2 LED indicator
mfB button - Power on/off, redial last
3
number, answer/reject a call, answer/reject
intercom
USB port - It is a charging port and is used
4
as a port for connecting to microphone and
ear speaker
vol+ - Turn up the volume and send out
5
intercom
6 Ear speaker
7
Microphone

- installing the interPhone

BTEASYCOM
1. installing the velcro attached to interphone head-
set
1) Before removing the protective strip from the dou-
ble-sided adhesive, find the best location to place the
velcro .
2) Clean the part of the helmet that the interphone
headset with adhesive will be attached to . Remove
any dirt or grease . Do not use cleaners that may dam-
age the helmet or that will leave an oily residue .
3) Check again the position of the velcro . Once it is fixed,
it will not be possible to move .
4) Make sure the surface is dry before continuing .
Remove the protective strip from the double-sided
adhesive and carefully fix the velcro to the outside
shell of the helmet .
note: There are two types of velcro, thin and thick . It is
recommendable to use the thick velcro when the curva-
ture in the surface of the helmet is large .

2. installing the interphone headset

Take your interphone headset, make the USB port
points down and attaches the interphone headset to
the velcro .
IT
EN
FR
ES
DE