GDD LIAC7IM3 Instrucciones De Operación página 5

SETTING UP THE SPECIAL FUNCTIONS SETTING UP THE SPECIAL FUNCTIONS
• After initial installation, you can manually adjust the settings. The initial setting remains active until the user changes it.
• The control panel can be used for multiple installations. Some functions may not be applicable to your unit.
SETTING STATUS
SET
CHECK
SEARCH
SELECT
CANCEL
SET
CHECK
1. Press and simultaneously for 5 seconds to enter special setting mode. "SETTING" and "STATUS" indicator is ON.
2. Press or to browse functions.
SELECT
3. Press to enter the function.
4. Press or to enable YES or disable NO function, or set your desired day and time.
SET
5. Press to confi rm.
Display Function *
External Thermo Controller (YES / NO)
To set external thermo controller connection.
Tank Connection (YES / NO)
To set tank connection.
Heating Priority (YES / NO)
To choose the heat pump only use for Heating side during HEAT + TANK mode.
Heating Heat-up Interval Set
To set timer for Heating during HEAT + TANK mode (0.5hour ~ 10hours).
Tank Heat-up Interval Set
To set timer for Tank during HEAT + TANK mode (5minutes ~ 1hour 35minutes).
Booster Heater Delay Time Set
To set delay timer for booster heater to ON if tank temperature is not reached (20minutes ~ 1hour 35minutes).
Sterilization (YES / NO)
To set sterilization, if required.
Sterilization Day & Time Set
To set timer for sterilization (only once a week).
Sterilization Temperature Set
To set temperature for sterilization function (40°C ~ 75°C).
Sterilization Continue Time
To set timer to maintain heating temperature in order to complete the sterilization function (5minutes ~ 1hour).
Day display
TIMER
HEAT
MONTUEWEDTHU FRI SAT SUN
TANK
ON
QUIET
HEATER
REMOTE
FORCE
OPERATION
Timer display Functions*
SELECT FUNCTIONS AND SET YOUR DESIRED TIMER
YES / NO / Temperature display
OUTDOOR
ACTUAL
HEATER
BOOSTER
C
SETTING
STATUS
C
PUMPDW
WATER OUTLET
SETTING / STATUS indicator
5