Glacier bay POLE CADDY 2104WWHD Guía De Uso Y Cuidado página 8

Installation (continued)
7
Preparing assembly for installation
WARNING: Injury may occur if you do not install the top
of the assembly onto the ceiling first.
□ Slip the tapered end of the short tapered tube (D) into
the untapered end of the bottom tube of the assembly.
□ Place the soft vinyl end cap (DD) on the short tapered
tube (D).
□ Place the tape strips (EE) around the seams of the tubes.
8
Installation
□ Lift the entire assembly into position over the shower stall.
□ Compress the top of the unit against the ceiling at the
desired location.
□ Move the bottom end into place on the shower floor so that
the unit is in a vertical position.
8
bottom shelf assembly
D