Shure Microflex MX400S Guia De Inicio Rapido página 11

MX412/MX418 CIRCUIT BOARD LEGEND • LÉGENDE DU CIRCUIT IMPRIMÉ MX412/MX418 • BESCHRIFTUNG
DER MX412/MX418 LETTERPLATTE • LEYENDA DE TARJETA DE CIRCUITOS DE MX412/MX418 • LEGENDA
MX412/MX418 SCHEMATIC • MX412/MX418 SCHÉMA • MX412/MX418 DIAGRAMM • MX412/
NOTES:
1. All resistors1/10 Watt, 1%, 0805 unless otherwise specified.
2. Electrolytic capacitors shown in F, 10%, 50V or more, unlss otherwise specified.
3. The following symbols denote:
A.C. Voltage A.C. Voltage, Mic Off
D.C. Voltage D.C. Voltage, Mic Off
(+) / (–) indicate A.C. polarity relative to
input test signal.
4. All voltages measured with input driven by a 0.1 Vrms, 1kHz signal through the test circuit shown below. A Shure M367 mixer or
equivalent, with 48 V phantom power switched on, supplies the required power and load to preamplifier.
DELLA SCHEDA DI CIRCUITI DEI MODELLI MX412/MX418
FIGURE 7 • ABBILDUNG 7 • FIGURA 7
MX418 DIAGRAMA ESQUEMÁTICO • MX412/MX418 SCHEMA
FIGURE 8 • ABBILDUNG 8 • FIGURA 8
Printed Clrcuit Ground
Case Ground
11