McElroy DATALOGGER 6 Guia De Inicio Rapido página 6

DataLogger
®
Connect Pressure Transducer to
Fusion Machine
1. Connect the pressure transducer end
of the cable to the DataLogger port of
fusion machine. Refer to the operator's
manual of the fusion machine for the
port location.
2. Connect the serial connector end of the
cable to the serial port of the tablet.
4:05
Monday, April 17
Settings
Starting the DataLogger
1. Open to the Home screen.
2. Tap the DataLogger
open the application.
4:05
Monday, April 17
Settings
Select Software Language
1. Tap Settings on the Main Menu.
2. Tap Preferences on the Settings Menu.
All manuals and user guides at all-guides.com
App
DataLogger 6
6 App
®
6 App icon to
®
DataLogger 6
3
3. Tap the Language button and set to the
desired language.
Entering Vault Information
1. Tap the lock icon on the main screen
to open the DataLogger
screen.
2. Log into a DataLogger
using a username and password.
If you do not have a Vault account,
open an internet browser on this tablet
and go to vault.mcelroy.com. Create an
account and return to the DataLogger
6 App and enter the username and
password.
Log a Fusion Joint
1. Tap the Log a Joint button.
2. Follow the on-screen instructions to
enter all the joint information and select
the fusion parameters.
After the setup is completed, logging of
the fusion joint can begin.
Troubleshooting
Perform a Hard Reset
1. If the device freezes, a hard reset may
fi x the issue.
To perform a hard reset: Hold the
Power button for 10-12 seconds until
the device restarts.
Vault log in
® ™
Vault account
® ™