Idiomas disponibles
Idiomas disponibles
English
Green yellow flashing
No display
Overview of the FAULT DISPLAY SYSTEM on the controller
The controller of the automatic refilling device identifies the faults during the operation and
indicates these with a red flashing LED indicator.
LED display
Rapid flashing red
Flashing red
Alternate flashing
red and green
Maintenance and cleaning
The cleaning of the pump rotor and the inside of the pump are dispensed with as, as a rule,
the pump only comes into contact with ultrapure / osmosis water.
Technical Data of the Automatic Refill Device
Country-specific variants
Part number
All manuals and user guides at all-guides.com
Sensor is in the area with the moving water surface.
It is possible that the power supply unit has no power
Sensor may be faulty
Sensor cable may be faulty
C1
Faults and possible causes
The filling time clearly differs from the usual filling time.
Could the refill reservoir be empty?
Is the hose no longer connected to the pump?
Is the drain elbow still in the correct position?
The time interval from the last filling operation clearly dif-
fers from the usual intervals.
Is there considerably increased loss of water?
Is the area in front of the sensor free?
Has the aquarium been manually filled?
The controller could be defective.
EU
3548220
21
GB
3548340
