Troubleshooting; Maintenance And Care; Specifications - LEITZ wireBIND 500e Instrucciones De Uso

Troubleshooting

Problem
You hear an alarm sound
from the unit.
No response when
pressing the punching
button.
The fuse is blown.

Maintenance and care

• To prevent damage to the motor and punching mechanism, empty the cuttings tray
• In case of defects: Do not attempt to repair the unit yourself. Contact the manufacturer for any required repairs.
Read guarantee declaration for further information.
• To clean the housing, unplug the unit and wipe the outside with a damp cloth. Do not use any chemicals for cleaning.
Specifications
Operating method
Paper size
Punching dies
Punching capacity
Plastic comb size
Power requirements
Power consumption
Net weight
Dimensions (W x D x H)
Subject to technical changes without prior notice.
8
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Remedy
Empty the cuttings tray immediately to prevent damage to the motor and punching
mechanism.
Check whether:
• the cuttings tray is full.
• the unit is properly connected to a live mains socket and switched on
• the fuse is blown. If yes, go to next step.
Replace fuse with same type and rating. If new fuse blows again, have the unit repaired
by the manufacturer. Never attempt to operate the unit with a fuse other than specified.
regularly.
23 (2:1 pitch), 34 (3:1 pitch)
25 sheets (80 g/m paper) or 2 transparent 0.2-mm films
6–28 mm (up to 250 sheets)
220–240 V AC, 50 Hz
450 mm x 550 mm x 170 mm
.
Electrical
A5, A4, US letter
400 W
21 kg